.png)
Locally owned in Edmonton, proudly serving our community for over 30 years.
Landscape Contractors Click Here
Closed March 21 - 30 for exhibition at the Edmonton Home & Garden Show
Pumps
Since 1924 Japanese pump manufacturer Tsurumi Pump has been producing pumps that satisfy customer’s demands for high quality, safety, and reliability.
Featuring:
-
Main components are made with 304 stainless-steel and composite resin
-
Ultra-lightweight
-
Watertight Cable Entrance with Anti-wicking block.
-
Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
-
Built-in motor protection
-
Continuous duty air filled copper wound highly efficient motor.
-
Corrosion Resistant Stainless Steel Motor Casing.
-
Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
-
Solids handling semi-vortex impeller
Optional but recommended: Vertical Float Switch
Inverter Panel
- for three-phase (220V) pumps
Tsurumi Water Feature Inverter Panels allow a three-phase/220V pump to operate on a single-phase/220V power supply. The inverter panel incorporates a variable speed controller to allow homeowners greater control of the flow and feel of their water feature.
Efficiency: Three-phase motors are more efficient than single-phase motors (often higher than 30%)Reliability: Three-phase motors are more reliable than single-phase motors
(frequently lasting 10 times longer)
Cost Saving: Three-phase motors are generally less expensive to operate than single-phase motors
Features & Advantages:
-
Protects the pump from voltage overload and power loss.
-
Prevents short circuits from damaging the pump motor.
-
Extends the life of the pump through the use of”soft-start”.
-
Allows the pump to operate at slower speeds for critical water circulation.
-
Replaces the need for multiple speed motors.
-
The homeowner has greater control of flow for aesthetics and noise effect.
-
Large commercial pumps can operate using residential power sources producing increased flow rates.
Retail Price
2OM: $ 619
3PN: $ 979
4PN: $1,239
8PN: $1,429
12PN: $1,519
4HF: $2,432
15HF: $3,495
F&Q High volume Submersible Pumps
These heavy-duty, cast iron pumps are an economical choice for waterfalls.
All pumps avilable in 115V or 230V
30' Power cords
3" discharge
One year warranty
Optional but recommended: Vertical Float Switch
WF150 HP Volts Amps 5' 10' 15' 20' 25' 30' Max Head Discharge Retail Price
1 120 16 17,199 14,700 10,800 7929 3,900 2400 32' $1977.75
TM17500 TM Series
High volume submersible pump – Low head 17500gph 230v
-
Up to 17,500 GPH flow at 230v
-
3″ outlets with 30′ power cords and thermal overload protection
-
Oil-free design – ideal for fish ponds
-
Top quality Japanese double mechanical seals
Optional but recommended: Vertical Float Switch
TM15000 HP Volts Amps 5' 10' 15' 20' 25' 30 ' Max Head Discharge
2 230 10 17,500 15,000 13,000 11,000 9,500 7,000 40'
Retail Price: $3317.75
ETP05N
1/2 HP Submersible Trash Pump – 115 Volt
This submersible trash pump is perfect for spring clean start-ups.
It handles sand, solids, leaves, algae, and other debris up to 3/8″ x 1″ in size.
-
115v motors with 20′ power cord and 2″ FPT discharge
-
Two-year warranty!
ETP05N HP Volts Amps 5' 10' 15' 20' 25' 30 ' Max Head
1/2 115 5.6 3600 3200 2700 2400 1800 1400 38'
Retail Price: $960.00
Little Giant Cleanout Pump
Little Giant Heavy Model 5 heavy-duty pond cleanout pump for quickly and effectively spring cleaning and emptying a pond and other types of water gardens for service.
They can run continuously at low water levels making them ideal for startups and cleanups.
Pump and collapsable pipe combo packages available.
In addition, a 1” FNPT outlet includes a garden-hose adapter so you can use your garden hose to flush the stream and entire water feature.
Featuring:
-
Epoxy coated cast iron or aluminum housings and contain non-toxic dielectric oil, which provides continuous lubrication for maximum motor life.
-
Epoxy coated cast iron or aluminum housings and contain non-toxic dielectric oil, which provides continuous lubrication for maximum motor life.
-
1200 GPH at 1’ maximum flow rate. It removes water down to 1/8”. The bottom inlet has a removable screen for easy cleaning.
-
Thermally protected and has a shaded pole motor.
-
1/6 Horsepower, 25’ Power Cord
Retail Price: $279.00
Triton Check Valve
The Triton Check Valve is the only check valve designed exclusively for the water garden industry.
The ‘swing style’ Triton Check valve features a 2″ socket union on the inlet, 2″ and 1.5″ socket unions for the outlet, a moulded-in 90-degree elbow, and a slim design that allows clearance when installed with direct drive pumps.
If simplicity and innovation is what you seek, Triton delivers.
Retail Price: $136
OASE – Waterfall Pump
-
Energy-efficient motor saves energy and money
-
High cleaning force, it pumps pond water and coarse debris particles, up to 1/2 inch through the mechanical filter
-
Smaller power cord plug size allow for pumps to be placed discretely
-
Grounding plate provides unparalleled protection against electrical hazards in your fountain or pond
-
3 YEAR WARRANTY
Optional but recommended: Vertical Float Switch
2300
Retail Price
OASE - 1650: $450
OASE-2300: $535
OASE-3700: $665
OASE-5150: $761
OASE-6600:$1,184
OASE-8000:$1,304
New!! Aquascape AquaForce Solids Handling Pump
-
Extremely energy efficient - saving hundreds over traditional pumps
-
Easy to service & maintain
-
Oil-free design
-
A durable pre-filter cage prevents clogging & reduces maintenance
-
Comes with multiple hose adapters
-
Provides years of trouble-free operation
-
Vortex Impellers - handles debris up to 1/4"
-
3 YEAR WARRANTY
Optional but recommended: Vertical Float Switch
Retail Price
AF1000: $360
AF1800: $430
AF2700: $460
AF3600: $530
AF5200: $660
Pro-Eco SP Submersible Pump
The SP Series pumps are expertly designed for use in waterfalls, streams, and fountain applications. Featuring a Split Tube hybrid motor, these pumps deliver the perfect combination of power and energy efficiency. Their asynchronous technology allows for full electronic control, enabling you to precisely adjust flow output while ensuring the pump uses only the energy required for optimal performance. Each SP pump is equipped with built-in thermal protection to prevent overheating and a pre-filter that helps keep the intake clear of debris.
$281.00
$324.00
$432.00
$486.00
$792.00
$875.00
-
These pumps perfectly fit into existing small fountains and water features.
-
Ideal replacement pumps for small water features
-
Grounding plate which provides the path of least resistance, insuring that any electrical leakage, from any power source in your fountain, harmlessly exits the fountain.
-
Control valve for fine-tuning water flow
-
2 year warranty
OASE 150: $55.00
OASE 320: $86.00
OASE 525: $120.00
OASE - Fountain Pump
EasyPro Submersible Mag Drive Pump Features:
-
Mag drive motors - super quiet and very energy efficient
-
Epoxy filled motors - no oil
-
Free fountain set with 400 & 850 gph pumps
-
Foam prefilter included on 400 & 850 gph. Larger pumps have screened inlet but no foam.
-
Flow restrictor valve included with each fountain set, 400 & 850 gph fountain sets include diverter valve allowing you to run a fountain nozzle and a waterfall at one time
-
3 Year Warranty EasyPro pumps are built durable, over 98% of these are still running after 3 years
-
UL and cUL listed
-
Threaded discharge ports on all pumps for easy fitting connection
EP 400: $143.95
EP 850: $199.95
EP1750: $394.95
EP3200: $429.00
Mechanical Vertical Float Switch - $125.00
Converts any manual pump, up through 1 HP (10 max. run amps), to automatic.
Can be mounted on your pump 8″ below the waterline level you which to have
the pump cease operation.
The pump switch is mounted in a vertical position to a pipe and is activated by the float upon a rising water level. As the water level rises, the float pushes the actuator rod upward which activates the mechanism inside the pump switch housing and turns the pump on. When the water level recedes, the float lowers the actuator rod downward which deactivates the mechanism inside the pump switch housing and turns the pump off. To adjust the pump differential, slide the rubber grommet up or down the actuator rod for the desired pumping range.
This pump power switch will add reassuring protection for your pump.
-
20' Power cord
-
Flexible wire construction
-
Hardware included for mounting
switch to discharge pipe -
Depth: 3.5"
-
Height: 3.4"
-
Working Range: 2" to 4.47"
